Home PageAbout Engravers Depot Inc.Contact Engravers Depot Inc. 1-800-387-3130
Exclusive Canadian Distributor for
Gravograph-New Hermes
Toll Free: 1-800-387-3130

Nose Cones

Depth noses are essential in ensuring perfect and constant engraving depth. We offer a wide variety of noses which are compatible with all our machines.

nose cones 20130
nose cones - 32777
nose cones - 20486
nose cones - 12215
.040 Steel nose cone for 1/8" cutters. Uses up to .020 cutter widths
Part no. 20130
060 Steel nose cone for
11/64" cutters. Uses up
to .040 cutter widths
Part no. 20131
092 Steel nose cone for 11/64" cutters. Uses up to .060 cutter widths
Part no. 20486
.185 Steel nose cone for 11/64" cutters. Uses up to .171 cutter widths
Part no. 12215
nose cones - 20936
nose cones - 20960
nose cones - 20491
nose cones - 20459
.093 Steel nose cone for 1/4" cutters. Uses up to .060 cutter widths
Part no. 20936
Wide nose for filling larger text/logos - to maintain contact with the surface of
the material to prevent "dimples or low spots" 16 mm .63 opening
Part no. 20960
.250 Steel nose cone for 1/4" cutters. Uses up to .187 cutter widths
Part no. 20491
5mm Steel Swivel nose cone for 11/64" cutters. For glass
engraving and to control depth on uneven or curved surfaces
Part no. 20459
nose cones - 22481
nose cones - 22885
nose cones - 31373
nose cones - 22884
3.5mm Teflon Swivel nose cone for 11/64" cutters. For glass
engraving and to control depth on uneven or curved surfaces -
prevents scratches.
Part no. 22481
Prismatic Swiveling Steel nose cone for 11/64" cutters. Used for curved jewelrybracelets such as ID or bangle bracelets
Part no. 22885
8mm Delrin nose cone for 11/64" cutters. Prevents
scratches on easily
scratched surfaces
Part no. 31373
Fixed Diamond nose
cone11/64". Provides
better rigidity & accuracy than a non-rotating diamond cutter. Also good for picture engraving and jewelry
Part no. 22884
nose cones - 32351, 21665
nose cones - 32353, 12718
nose cones - 21667, 31372
Delrin nose cones - 31377, 31376
3.3mm nose cone and nozzle assembly for collet spindle chip
collector
Part no. 32351

3.3mm nose cone only
for 11/64" or collet spindle chip collector
Part no. 21665
1.5mm nose cone and
nozzle assembly for
collet spindle chip collector
Part no. 32353

1.5mm nose cone only
for 11/64" or collet spindle
chip collector
Part no. 21666
8mm nose cone and
nozzle assembly for
11/64" cutters using chip collector Uses up to .171 cutter widths
Part no. 31372

Standard nose cone for 11/64" chip collector
Part no. 21667
2" Delrin nose cones for 11/64 spindle
Part no. 31377

2" Delrin nose cones for collet spindle
Part no. 31376

Used for plastic cut outs to handle high chip loads