CHIP REMOVAL SYSTEMS |
|
| Compact Chip Collector with auto on/off for M20/M40 series |
47645 |
| Professional High Volume Chip Collector with |
|
| auto on/off & 1.5, 3.3, 8 mm noses |
49265 |
| Replacement Bag for Professional |
|
| High Volume Chip Collector |
49092 |
| High Performance Chip Collectors |
|
- for top load 11/64 spindle
|
|
| (with 8 mm nose for cutter tip sizes to 0.171 ) |
31370 |
- for collet spindle with nozzle (with 8 mm nose )
|
32348 |
- for collet spindle with nozzle (with 3.3 mm nose )
|
32350 |
- for collet spindle with nozzle (with 1.5 mm nose )
|
32352 |
| Replacement Filters for High Performance Chip Collectors |
|
- Filter bags (5-pack) for High Performance
|
|
| Chip Collector |
47568 |
|
49114 |
| Replacement filter bags for GAST |
|
- Paper filter bags - GAST chip col (qty 12)
|
16640 |
- Cloth filter bag - GAST chip col (qty 3)
|
16641 |
CYLINDRICAL ACCESSORIES |
|
| M20 JEWEL Pen Holder Cylindrical Kit OPTION |
48691 |
| M20 Ring holding device for outside ring engraving |
49514 |
| M20 Ring holding device + Tailstock |
49811 |
| M40 Cylindrical Attachment |
46676 |
| M40 Pen Attachment |
47765 |
| IS200 Pen Attachment (0.6 in - 15 mm |
|
| (also includes Electronic Board - Pre-MEBP) |
22865 |
| IS400 Cylindrical Attachment - MEPB |
47770 |
| IS400 Cylindrical Attachment - Pre-MEPB |
|
| (requires Electronic Board) |
23514 |
| IS400 Pen Attachment - MEPB |
47766 |
| IS400/IS700 Pen attachment - Pre MEPB |
|
| (requires Electronic Board) |
23519 |
| LT Pen Attachment Kit - Pre-MEPB |
|
| (requires electronic board and standard vice) |
32261 |
| LT Pen Attachment Kit - MEPB - requires 47739 extension cable |
47766 |
| MiniDIN Cable Extension for LT Pen Attachment |
47739 |
| XP Cylindrical Attachment for older v1 XP systems |
27606 |
| XP Cylindrical Attachment for new systems, includes |
|
| electronic board kit. (consult factory for part # |
|
| for use with older XP systems) |
27607 |
| Electronic Board Kit (not required with MEPB controller) |
23554 |
| IS400V Glass Engraving Kit |
32195 |
| IS400 TO IS 400 VOLUME UPGRADE (NON-MEPB) |
|
| Includes volume base, vol cyl att, Electronic Board Kit, |
|
| cones & on-site labor. |
48692 |
| IS400 TO IS400 VOLUME UPGRADE (MEPB) |
|
| Includes volume base, vol cyl att., cones & on-site labor. |
48693 |
| Chuck 13.75 inches (IS400V) |
23527 |
| Chuck - 3-Jaw - Outer Adjustment Ring (IS400) |
27161 |
| Chuck - Otelo Heavy Duty Precision Chuck (IS400 + LT) |
22625 |
| Cones - IS400V Large cone kit, 6"M, 8.5"M, 11"M, 14"M |
23570 |
| Cones - IS400V Small cone kit, 2.5"F, 3"M, 4"F, 4"M, 4.7"M |
23571 |
ENGRAVING LUBRICANTS |
|
| Lubricant - EngravoLube (8 oz) |
32819 |
| Lubricant - Synthetic Coolant (mix with 1 gal water) - |
|
| for M40Gift, IS400 Gift & LT |
32863 |
| Lubrication kit (LT) |
31703 |
| LARGE TABLE STANDS |
|
| IS7000 (& XP) Engraver Stand |
23643 |
| IS8000 (& XP) Engraver Stand |
23644 |
| IS900 Engraver Stand |
62220 |
| IS400 Volume Engraver Stand |
23528 |
| Castors for IS900 Engraver Stand (each) |
15336 |
| TABLE OPTIONS |
|
| IS400 T-Slot Table |
23520 |
| IS400 Vacuum Table & mat (without pump) |
32240 |
| IS400 Vacuum Table & mat (with pump) |
32239 |
| IS400 Vacuum Table rubber Replacement Mat |
23501 |
| IS7000 / 8000 Standard Self-centering vise |
23648 |
| IS7000 / 8000 Heavy Duty Self-centering Vise |
23649 |
| IS900 Vise |
61329 |
| Quick-connect toggle clamp for T-Slot Tables |
22243 |
| Long clamp with T-nut (set of 2) |
23763 |
| Long clamp with Quick-nut (set of 2) |
23764 |
| Back clamp (set of 2) |
23765 |
| Left clamp w spring (set of 2) 23762 |
23762 |
| Heavy-duty clamp for fixing metallic materials, black (1 ea) |
22294 |
| REPLACEMENT BELTS |
|
| IS200 Spindle motor belt |
13457 |
| IS400 Spindle motor belt |
14246 |
| IS700 Spindle Motor belt (lower) |
11446 |
| IS700 Spindle Motor belt (upper) |
32610 |
| IS900 Std Spindle Belt |
55016 |
| IS900 Notched Spindle Belt |
54961 |
| ISx000 Spindle Motor belt (90W motor) |
14588 |
| ISx000 & XP Spindle Motor belt (200W motor) |
14643 |
| ISx000 X-Axis belt |
14547 |
| ISx000 & XP Y-Axis belt |
14593 |
| ISx000 Z-Axis belt |
14564 |
| ISx000XP X-Axis belt |
14841 |
| ISx000XP Z-Axis belt |
14856 |
| GRAVOGRIP MAT |
|
| Specifically designed for computerized engraving systems |
|
| allowing highly accurate engraving on multiple materials |
|
| Gravogrip replacement (8 x 12") with holes for M40 vise pins |
46934 |
 |
|
32262 |
|
32263 |
|
32264 |
|
26528 |
| MISC |
|
| Relay kit box for accessory such as chip collector (10A capacity) |
23518 |
| Relay box adaptor cord |
32235 |
| Clear plastic flexible ruler |
10184 |
| SPINDLES |
|
| Spindle - Heavy Duty Diamond spindle with insert, non-rotating |
22224 |
| 1/8 Dia. Insert for Heavy-Duty Fixed Diamond Spindle - Length 1" |
33827 |
| 1/8 Dia. Insert for IM4RM & Manual Inside Ring Engr - Len 5/16" |
28187 |
| 1/8 Dia. Insert for M20D, M20Pix - Length 7/16" |
33825 |
| Wrench for diamond insert |
33009 |
| Spindle - Collet Spindle only (does not include collet) |
14763 |
| Spindle - Short Collet (1/4") |
23694 |
| Spindle - Short Collet (1/8") |
14721 |
| Spindle - Short Collet (11/64") |
23698 |
| Spindle - Standard Top-Load Spindle (11/64") |
20471 |
| 200W Spindle Motor Booster Kit for LT |
|
| (Included standard on XP) |
23652 |
| Preset Cutter Knob, not threaded |
|
| (use to preset tool offsets on M40 & Collet Spindle) |
22740 |
| Integrated 150W High Frequency Spindle (60Krpm) includes Frequency |
|
| converter, spindle, floating nose kit and 1/8” standard collet. |
|
| ORDER CABLE KIT (below) for your machine |
47477 |
- External Cable Kit for IS400 [non-MEPB]
|
47741 |
- External Cable Kit for IS400 MEPB
|
47746 |
- External Cable Kit for ISx000 [non-MEPB]
|
47743 |
- External Cable Kit for ISx000 MEPB
|
|
- External Cable Kit for ISx000XP
|
47745 |
| 3.17 mm [1/8”] Collet (included standard) |
47413 |
| 3.17 mm [1/8”] Extended Collet – necessary when |
|
| using a chip collector nozzle |
47452 |
| 2.00 mm [0.079”] Collet |
48050 |
| 3.00 mm [0.118”] Collet |
48065 |
| 4.00 mm [0.157”] Collet |
48066 |
| 1/8” carbide cutter for high speed applications: |
|
| 0.030” tip, 1.5” length, 30° cutting angle. |
|
| Other tip sizes & cutting angles are available by special order |
33845 |
