Home PageAbout Engravers Depot Inc.Contact Engravers Depot Inc. 1-800-387-3130
Plastic Dress Up Ltd.


Fabrication equipment Page: 1 2 3

Shear cutting thickness specs:

  Metal Plastic Combo
Flexible Plastics   1/16" 1/16"
Trophy Brass 0.025"   0.020"
Aluminum 0.050"   0.030"
Steel 0.025"   0.015"


Shears and Saws

Combination metal, and plastic shear

  • The lower blade is easy to set and replace.
  • The handle offers leverage for easier cutting.
  • There is no flex on the upper blade.
  • Three scale selections optimize the settings of blades.
  • There is no need to adjust the upper blade.
  • Improved angles on the upper blades result in smoother cutting.
  • Parts are easy to replace because the shear is modular in design.

  • Combo shear part number - 31711
    Metal shear part number - 20199
    Plastic shear part number - 20198


VA- 10 safety saw

VA-10 safety saw

  • Maximum cutting thickness for plastics up to .250” thick.
  • Maximum cutting thickness for non-ferrous metals (brass and aluminum) up to .157” thick.
  • Safely cuts plastics and metals up to 24.5” wide.
  • Accurate cutting ensured by a movable stop with automatic return and ruler.
  • Integrated chip collector.
  • Lubrication system, saw comes standard with .5 liter (16.9 oz) bottle of Vargol lubricant.
  • Saw blade: 24 Tungsten Carbide.
  • Motor: 350 watt, 60hz, 110 volt, 15,000 RPM.
  • Dimensions: 32.7” x 21.7” x 9.8”.

    Part number - 21771
    Replacement blade, 24 teeth: 21773
    Optional blade, 36 teeth: 21796
    Vargol lubricant, 16.9 oz. bottle: 21780
    Replacement on/off switch: 21784
    Fuse - 10 amp pack of 5: 49898
VA21 - 15 safety saw

VA21-15 safety saw

  • Maximum cutting thickness for plastics up to .2725” thick.
  • Maximum cutting thickness for non-ferrous metals (brass and aluminum) up to 0.197” thick.
  • Safely cuts plastics and metals up to 40.55” wide.
  • Integrated chip collector.
  • Lubrication system, saw comes standard with .5 liter (16.9 oz) bottle of Vargol lubricant.
  • Saw blade: 36 Tungsten Carbide.
  • Motor: 500 watt, 60 Hz, 110 volt, 13,000-15,000 RPM.
  • Dual stop on right hand side with spring-operated return and graduated ruler.
  • Side stop on left hand side with adjustment and material support.
  • Dimensions: 50.4” x 21.7” x 9.8”.

Part number - 21769
Replacement blade, 36 teeth: 21796